FURY MINI FLEXO SLOTTER / PARTITION SLOTTER 1600 X 450 MM
The rotary mini flexo slotter / partition slotter Fury does consist of a kicker feeder and slotter group - to convert interlocking partitions and small corrugated boxes of any kind.
It can be supplied with one - two flexo printing groups (top printing) and with counter gathering stacker.
A device for small prints - to be applied onto the slotter - is available alternatively.
This is a versatile machine for easy use, economical and convenient for small runs, too.
Due to the modular structure, the different units do allow slitting, slotting, scoring and printing.
Of course the units are interchangeable and further modules could be retrofitted to the machine at any time later.
It’s strong construction, its simple control and its easy and quick set-up stands for high productivity.
Working width: 1600 mm
Max. sheet size: 450 x 1600 mm
Max. sheet size with skip-feed: 720 x 1600 mm
Min. sheet size: 180 x 170 mm
Max. flap size: 37 x 753 mm
Min. flap sizes: 37 x 37 mm
Slotting knife width: 5 mm
Max. printing size: 450 x 1550 mm
Stereo height: 6 – 8 mm
continuous current motor variable speed
max. mechanical speed: 12.000 sheets/h
DETAILS SEE ENCLOSED DATA SHEET
(FOR RSC BOXES AND PARTITIONS)
· 6 pairs of slotting bosses
· 1 pair of stitch flap slotting boss (steel against Polyurethane)
· 14 slotting knives, 125 mm
· 4 pairs of creasing bosses (steel against Polyurethane)
· 2 pairs of trim knife bosses
· 1 kicker bar with feeding bars for partitions, single flute- and double flute corrugated
· back stop for RSC boxes
· back stop for partitions
additional suction assistance for kicker feeder
4 pcs. pneumatic expanding shafts for creasing and slotting bosses
1 or 2 flexo print units MINIFLEX 516 (see description)
1 small stamp printing unit (to be installed on the slotter) with a max. printing size of 120 x 450 mm
1 set (3 pc.) transport rollers for multi-out partitions
kicker bar for partitions
kicker bar for single flute corrugated
kicker bar for double flute corrugated
DESCRIPTION FLEXO-PRINT UNIT MINIFLEX 516
· top printing
· 1 pair of transport shafts with transfer bosses
· system: anilox roller against rubber roller
· wash down through washing motor
· ARO-air pump
· manual set-up of board calliper
· manual register set-up
· variable set-up 6-8 mm of printing plate heights
· chromed transport shafts and printing plate cylinder
Length: approx. 1300 mm
Width: approx. 2610 mm
Height: approx. 1220 mm
Rails for flexo print units length: approx. 2300 mm
Feeder + slotter: approx. 1500 kg
Flexo print unit: approx. 1140 kg
The Mini Flexo Slotter Fury will be supplied with the CE certificate.
TECHNICAL MODIFICATIONS RESERVED WITHOUT NOTICE.