BIZZOZERO MICA CLEVER BOXMASTER 2750 boxmaker

                                                      

COMPLETELY EQUIPPED WITH SERVO DIRECT-DRIVES

ALSO WITH NEW CLEVER CONTROLS

AND AUTOMATIC CALLIPER SET-UP

RESULTING IN FASTER SPEED

BETTER EFFICIENCY

WITH LARGER VERSATILITY AND FLEXIBILITIY

FOR QUICKEST SET-UP TIMES

AND ABSOLUTE PRECISION


Apr. 114 FEFCO Codes + special boxes are possible!

                                                                      

  • SERVO direct-drives:
  • - for the feeding, transport and timing of the sheets in working direction through the machine
  • - for the front slitting knife in cross direction
  • - for the cross beam (slotting and creasing) up to a speed of 180 m/min.

  • CLEVER control allowing one slotting cycle in less than 0,6 sec.; thus a large FEFCO 0201 box of 3 m length could be converted within 4 seconds – theoretically resulting in up to 12.000 m²/h.
  • fitted with new, 15“ coloured Pro-face touch-screen computer

  • automatic calliper set-up of the slotting-creasing bar -  for quickest set-up times
  • the tools being set-up from one central position only – all tools are easily accessible
  • large sheet sizes up to 2.810 x 10.000 mm
  • all corrugated qualities – even up to 16 mm triplex corrugated
  • equipped with tools for cross- and length direction, so that the machine can slit, slit-scor, slot and crease in both directions + die cutting + flexo printing

due to this fact, the number of boxes to be converted and the versatility is increased tremendously; it is possible to cut out flaps and windows …

  • the machine can be equipped for 2-outs next to each other – and multiple ups behind each other
  • also 3 pneumatic units next to each other could be installed for 3-outs – if the sheet sizes do allow it

  • Flexo printing: up to 3 independent flexo print units could be integrated. 2 small mini flexo print units within the Clever Boxmaster + 1 large, direct driven JUMBO FLEXO PRINT UNIT 2500 optionally – with different printing positions
  • the creasing tools / slitting knives could be set until a distance of 0 mm (using both sides of the bar)
  • best production availability through new, direct teleservice from the customer to the BIZZOZERO service centre

 

OPTONALLY:

  • with rising table and MASTERFEEDER it is a 1–man operation machine! The operator could pre-fold the sheets already behind the Boxmaster – for a taper or stitcher
  • using the patented CLEVER DIE CUTTER rotary die cutting units, any type of box could possibly be converted
  • 1 large, direct driven JUMBO FLEXO PRINT UNIT 2500 with different printing positions

TECHNICAL MODIFICATIONS RESERVED

To top

To top

To top