EDF CASTALDINI SHEET TRANSFER STATIONS

 

AUTOMATIC SHEET TRANSFER STATIONS FOR CORRUGATED FROM A FLEXO PRINTING MACHINE INTO AN AUTOMATIC FLATBED DIE CUTTER

The SHEET TRANSFER unit is used to connect a modular printing line to a flatbed die cutter.

It collects the printed corrugated sheets in a shingled stream due to dedicated wheels, which control the landing point of the incoming cardboard. The position of the wheels is adjustable according to the board length.

The shingled stream then will feed the flatbed die cutter.

The exit end of the SHEET TRANSFER is vertical and horizontal adjustable to match the position of the flatbed die cutter feeding hopper backstop.

It follows electronically the speed of the printing line so that the shingling percentage is kept constant, even when the speed changes. The speed reference can also be passed to the flatbed die cutter so to keep all the line in the same speed when the printer increases/decreases its speed.

The SHEET TRASFER unit is fitted on rails for lateral positioning, so that the two machine eventually could operate off-line.

It fits into a standard container or truck for delivery.

Carboard Type: All

To top