ETERNA semi automatic flatbed die cutter, ww 1620 x 1200 mm, model SA-1620E from 07.2011 - with high-pile pallet stacking, without stripping station, without gripper waste extraction

 

Manufacturer: Shanghai Eternal Machinery Co., Ltd., No.1125 Taishun Road, Jiading District, Anting Town, 201814 Shanghai, P.R. China

Model: SA-1620E

Year of construction: 07.2011

 

SPECIFICATIONS:

Maximum Sheet Size: 1620 x 1200 mm

Minimum Sheet Size: 500 x 380 mm

Maximum Cutting Size: 1600 x 1180 mm

Inner Chase Size: 1630 x 1210 mm

Maximum Mechanical Speed: 3000 cycles/hour

Maximum Cutting Pressure: 400 tons

Stock Range: E, B, C, A and CA flute corrugated board

Minimum Gripper Waste: 12 -15 mm (subject to die layout, paper quality and

(Distance from first knife to paper edge) operation skill)

Cutting Rule Height: 23,8 mm

Total Power Required: 25 KW

Main Motor Power: 15 KW

Air Pump Displacement: 0,35 m³/min. (prepared by user)

Electrical Power: 380 V, 50 Hz, 3-Phase

Mobile Lower Platen Adjusting Range: ±1,5 mm

Net Weight: 23 t

Total Length: 4500 mm

Total Width: 5200 mm

Total Height: 2200 mm

 

FEEDER (manual feeder)

  • Effective in feeding real warp corrugated board, increase efficiency

  • Side guide to position the pile centre

  • Feeding lift pallet

     

DIECUTTING SECTION

  • Crank and worm gear, toggle drive system for the lower platen

  • Stationary high precision upper platen

  • Safety door and die chase safety locking system

  • High torque pneumatic clutch/break for positive clutch on and reliable breaking

  • Cutting pressure fine adjustment wheel with position indicate gauge

  • Overloading protection torque limit clutch

  • State-of-the-art 3 cam index gripper chain drive

  • Center line system compatible to Centre Line II, makes the cutting die and stripping die centred quickly

  • 7 pieces of gripper bar each with 23 spikes

  • Sheet arrival and departure check photo sensor

  • Left and right front lay locking blocks, separating and synchronizing adjustment available

  • Self-diagnostic trouble display

  • Digital speed display

  • Automatic recycling lubrication system with oil pressure gauge and oil pressure switch

  • Automatic main gripper drive chain lubrication

     

HIGH-PILE DELIVERY

  • High pile delivery system with auto pile lifter

  • Electronic batch counter

  • Spring loaded adjustable chain tension back buffering wheel to maintain the chain tension constant and smooth gripper bar movement


ELECTRICALS

PCL system to control machine running and trouble surveillance

CE standard electrical components and circuit

 

STANDARD ACCESSORIES

  • One 6 mm hardened (HRC45) cutting plate

  • One die chase

 

The machine will be supplied with the CE-declaration of conformity according to EEC regulations for machines.

Technical modifications reserved.

To top

To top