IMG KLETT 2750 x 6000 mm boxmaker Boxking GT from 2007. With rising table + Autofeed up front. Suitable for triplex + quatruple corrugated board!

 

1 SECOND HAND HYRAULIC LIFTING PLATFORM

Supplier: IMG KLETT GmbH, Dreherstr. 11-15, 42899 Remscheid, Germany

Model: rising table 3.000 kg

Year of construction: 2007

Machine data:

- dimensions: 6.000 mm (L) x 2.500 (W) x 380 (H) mm

- weight: 3.300 kgs

- max. lifting height: 2.000 mm

- security border below the lifting platform


1 SECOND HAND AUTOFEED

Supplier: IMG KLETT GmbH, Dreherstr. 11-15, 42899 Remscheid, Germany

Model: AUTOFEED 2800

Year of construction: 2007

Sheet sizes IMG KLETT BOX KING AUTOFEED:

- minimum: 850 (L) x 400 (W) mm

- maximum: 6.000 (L) x 2.800 (W) mm

- thickness minimum: 2,5 mm

- thickness maximum: 16 mm


1 SECOND HAND BOXMAKER BOXKING GT

Manufacturer: IMG KLETT GmbH, Dreherstr. 11-15, 42899 Remscheid, Germany

Model: BOXKING GT

Year of construction: 2007

 

STANDARD MAIN FUNCTIONS

in machine direction (at slitter-creaser):

  • precrushing

  • creasing

  • trimming

  • slitting off 2 outs

cross machine direction (at cross bar):

  • slotting

  • creasing

  • pre-crush for stitch flap edge and box end (max. 50 mm width)

cross machine direction (at multi tool speed slide):

  • cut-off

  • creasing

  • perforation

  • off set slitting

  • off set creasing

  • off set perforation

 

TECHNICAL DATA

sheet size min.: 620 (L) x 360 (W) mm

sheet size max.: 6.000 (L) x 2.750 (W) mm

board thickness: 2,5 - 16 mm

repeat precision: +/- 1 mm

machine speed: continuous variation from 0 to 180 m / min.

cycle-time speed knife: approx. 0,5 sec.

cycle-time slotting bar: approx. 0,7 sec.

minimum between 2 creasers: 30 mm / until 0 mm on 2 shafts

minimum between 2 slitters: 50 mm

board line: 1.000 mm from floor

thickness slotting knives: 8 + alternatively 10 mm?

main drive: brushless; nom. torque 22 Nm.

drive speed knife: brushless; nom. torque 8 Nm.

drive slotting bar: brake motor 3 kW with reduction gear

voltage / power requirement: 400 V / 50 Hz / 20 A

air consumption: 100 nl / min., at 8 bar

dimensions, machine in working position (without platform and cabinet):

L x W x H ca. 5,4 (6,4) x 3,5 x 2 m

total weight: approx. 7.000 kg


The IMG KLETT BOXKING GT is delivered with the European safety certificate CE

ALL TECHNICAL DATA ARE SUBJECT TO MODIFICATION WITHOUT NOTICE

To top

To top