1 second hand LAMINA automatic laminating / mounting machine, ww 1600 x 2000 mm, model FASLINE+ 1620 FL+, with pressing station and automatic stacker from 2019

 

Manufacturer: Lamina System AB, Vevgatan 21, S-504 64 Boras, Sweden

Model: FASLINE+ 1620 FL+

Year of construction: 2019

A Lamina Model FASLINE+ full sheet laminator - for sheet-to-sheet laminating of paper and cardboard-to-cardboard, solid and corrugated. The machine features a modular construction which combines a rigid framework with modern anodized aluminium profiles resulting in a heavy-duty, yet attractive unit that will give many years of dependable service. Set up and changeover are accomplished quickly and easily from the operator side without the use of tools. A combination of mechanical and photocell controls results in consistent registration accuracy of less than +/- 0,5 mm when proper materials and conditions exist.

The Lamina FASLINE+ is a fully automatic high speed sheet-to-sheet laminating/mounting machine. The machine is equipped with a high capacity rear edge top feeder allowing loading of pallets directly in to the unit to shorten stops due to reloading.
Bottom sheets are fed in to the machine by using a servo controlled non-stop belt feeder. The feeder is equipped with a heavy duty vacuum system to assure reliable feeding of various substrates.

Set-ups are quick and easily done because of the compact construction and easy operation. Lamina FASLINE+ is performing a high quality registration accuracy combined with an high output and non-stop production.

SPECIFICATIONS:

High-speed: up to 5.000 sheets/h.

edge to edge: consistent registration accuracy up to 0,2 mm

EQUIPPED WITH:

- Automatic non-stop substrate sheet feeder

- Automatic stream sheet feeder for the top sheet

- Precision gluing unit with automatic glue application

- Laminating station with automatic front and side registration system

- Pressure station

- Stacking table

- PLC control system

- stronger vacuum pump for belt feeder

- cylinder with foot switch for belt feeder

- glue container system

SHEET SIZES:

Max. width: 1600 mm

Max. lenght: 2000 mm

Min. width: 500 mm

Min. lenght: 500 mm

Top sheet: 130 to 350 g/m² 1 pts = 28,25 g/m²

Bottom sheet: thickness: 0,6 to 10 mm (0.016” to 0.39”)

Machine width: ca. 2.650 mm

Machine length: ca. 13.700 mm

Machine height: ca. 2.750 mm

Total installed power: ca. 4,0 kW, 20 A

Electrics: 400 V, 3-Phase, neutral, PE, 50/60 cycles

Compressed air: 6 bar; 80 psi; 34 CFM, ca. 500 L/min., oil and waterfree air

* depending on quality of materials and existing operating conditions

Automatic substrate sheet feeder: For automatic feeding of the bottom sheet. The sheets are fed by continuous running belts. The stack is filled from the top. The feeder is designed to handle materials with a thickness from 0,6 mm up to 10 mm.

Automatic stream sheet feeder for the top sheet: For automatic feeding of the top sheet. Suction cups pick up the top sheet from the stack and transport it to the top sheet conveyor. The feeder is designed to handle materials 130-350 gm/m².

Precision gluing unit: The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispenser directly connected to the glue container. The glue is automatically kept under control by a sensor. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. the precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.

Laminating station: In the automatic laminating station, the top and bottom sheets are automatically controlled by the registration system. The sheets are registered automatically at the edge as well as at the operator side. Photocells prevent the lamination process unless both sheets are properly positioned.

Pressing station: This unit consists of an adjustable press roller-system, ensuring perfect lamination.

PLC control system: The Lamina PLC control system includes: Coloured touch screen monitor, continuous display of operating status, display of set up procedures for machine functions, touch screen activation of controlled machine functions and complete diagnostic screen with visual alarm.

Pressing belt (shingled feeding): Equipped with endless rubber belt. The pressure is achieved via the own weight of 9 steel rollers. The top part of the pressing belt can be adjusted – according to sheet length.

Automatic stacking table: For the stacking of finished products. The table can be turned and pulled out acc to requirements.

Technical modifications reserved.

To top